Your browser is no longer supported. Please upgrade your browser to improve your experience.

Type 810 Doppler Velocity Flowmeter

Valeport’s Type 810 is a self-contained continuous wave doppler flowmeter that offers industry-standard performance coupled with robust build quality and reliability, all backed up by Valeport’s exceptional customer service and support mechanisms.

It incorporates all of the low noise electronics to drive propriety Digital
Signal Processing techniques that provide measurements in both waste
and clean water with flow rates as low as 0.01ms-1 and up to 5 ms-1. Even
in very shallow water (0.15 to 0.20m) accuracies of better than 0.01ms-1
can be achieved.

The Type 810 has its own height | surface lookup tables. With a real-time
height data interface (Modbus or SDI-12), flow can be calculated directly.
Used stand-alone or as part of an integrated solution the Type 810 is
compatible with 3rd party data loggers, telemetry and SCADA systems:
• SDI-12 | RS232 | RS485-Modbus RTU direct from the unit.

The Type 810 derives a quality figure for the calculated flow measurement.

The level of integrity of flow measurement is calculated using two factors:
Flow Balance and Signal Level. The Flow Balance is an indication of
how laminar the flow is, while the Signal Level is the spread of point
measurements compared to the final calculated flow value over a period
of observation. A quick, simple metric that gives you confidence in the
system’s performance.

Key Features:

  • High accuracy velocity measurement even in very shallow water
  • Low power consumption
  • Bi-directional flow measurement
  • Digital signal processing and filtering
  • Velocity measurement: temperature and sound speed correction
  • Integrated temperature
  • Direct data output:
    Open Protocol – Velocity | Quality Metric | Volume (with level input)
  • Expert mode for data diagnostics
  • 3 year warranty

Operations:

Open Channel and Pipeline flow monitoring for:

  • Industrial & Treatment plants | Wastewater networks | Sewers | Canals | Rivers | Streams
  • Trade Effluent & Discharge surveys – Diagnostics
  • Flow check surveys
  • Flood & CSO monitoring
  • Stand-alone & Integrated solutions
  • Permanent installation
  • Temporary deployment

Support

Type 810 Datasheet
Type 810 Datasheet - Italian
Type 810 Technical Documentation

Software

Technical Specifications

Sensor

The Type 810 Flowmeter measures the flow of water
using the principle of Doppler shift. A signal of 1MHz
is transmitted from a dedicated transmit transducer,
the reflected signal is received at a dedicated receive
transducer. The change in frequency is resolved using DSP techniques and a flow speed determined.
The speed of sound in water, important for accurate
doppler shift determination, can be a fixed value or constantly updated through temperature observation and a user defined conductivity value.

Operational Performance

Flow: Bi-Directional
from a minimum of 0.01 ms-1
to a maximum of 5.0 ms-1
Accuracy
Steady, fully developed flow (note 1)
Resolution Less than 0.5 ms-1 ±0.01 ms-1
Greater than 0.5 ms-1 ±2%
with uniform velocity profile and known water conductivity
Resolution 0.001 ms-1
(note 1 - Field performance is site specific)
Temperature Measurement
from a minimum of -10º C
to a maximum of +85º C
Accuracy ±0.5º C
Resolution 0.5º C
Minimum water level
15mm to 20mm above the base of the sensor
Transducers to be fully wetted

Electrical

External Power
9 to 28 V DC
Power Consumption
standby: 14mA
operating: 25mA
(at 12 V)
Cable
10 core, 8 mm diameter Polyether
Polyurethane cable with integral strain cord
Termination:
Bare leads
Amphenol: 62GB-56T12-10SN (metal)
Souriau: UTS6JC12E10S (plastic)
Length
10 … 100m - ATEX
10 … 300m - non ATEX
(in 10 metre steps)

Operational Characteristics

Temperature
Operational
from a minimum of -20º C
to a maximum of +60º C
Storage
from a minimum of -20º C
to a maximum of +70º C
Immersion
IP68 | NEMA 6
Units - user selectable options
ms-1 | fs-1
ºC | ºF
Modes
Single measurement
Multi-measurement
Continuous measurement
Outputs
Flow Speed | Temperature | Quality | Metric | Diagnostics
Digital Communication
Hardware \ Protocol RS232 \ # commands
RS485 \ Modbus RTU
SDI-12 \ SDI-12

Physical Characteristics

Materials
PVDF | Polyurethane | Stainless Steel 316
Dimensions
Length 122 mm
Breadth 46 mm
Height 19 mm
Weight
1.1 kg with 10m of cable
Mounting
Underside: 3x M3 female mounting points

Calibration

The Type 810 is tested to an in-house specification. These tests are conducted using procedures defined by the manufacturer

Software

Valeport Water supply Valeport’s Configure Windows software for instrument set up

Ordering

0810010-xx-N
unterminated
0810010-xx-A
Amphenol (metal) connector
0810010-xx-S
Souriau (plastic) connector
Where xx is the cable length

Product Enquiry

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Related Products